The powerful, robust HW series hydraulic winches of the NOVAWINCH lineup, they are rugged, heavy duty, high performance. Full range from 6kN to 25kN, handle the toughest industrial/commercial applications. HW series as well as meet EN14492-1:2006 requirement.

Categories: ,



First layer line pulllbs/kg 45000/20412
First layer line speed(fpm/mpm) Normal speed  11.5/3.5 High speed 49/15
Working pressure diff.psi/MPa 2465/17
Oil flow supplyl/min 70
Gear ratio 84:1
Wire rope dia.inch/mm Φ7/8″/Φ22
Layer 4
Wire rope capacityft/m 196’/60
Valve model NF-120 P1 S1-003
Net weight(without wire rope)lbs/kg 948/430


Layer of cable Rated line pull per layer Line speed Wire rope capacity per layer
llbs kg fpm mpm ft m
1 45000 20412 11.5 3.5 39’ 12
2 39277 17816 12.5 3.8 85’ 26
3 34846 15806 14.1 4.3 137’ 42
4 31313 14203 15.7 4.8 196’ 60

1. The winch will never be used for hoisting people or hoisting objects above people.
2. Do not use clutch under load.
3. Do not equip winch into oil supply system which without relief valve.
4. Do not exceed 500kg loads under high speed mode.


1. Recommended oil flow supply range is 30-90 l/min.
2. One balance valve as standard, winch must be used in Independent oil supply system which with relief valve.
3. Wire rope out direction please see above figure, DO NOT change direction without permission.Please ask when choosing winch type if need to change wire rope out direction.
4. Hydraulic motor drainage port must be directly connected to oil tank.
5. Relief valve can be selected from the valve block selection table as optional.
6. Winch has high speed, neutral and normal speed three gears.